top of page

BASKETBALL HOOP INSTALLATION

Making memories that'll continue to be made for a lifetime with your new basketball hoop!

The work required is not an easy task — digging a 4-foot deep‑hole, setting anchor bolts perfectly in 1,200 lbs–2,300 lbs of wet concrete, lifting a 200 lb glass backboard, micro‑leveling the whole system left‑to‑right & front‑to‑back and then calibrating it to 10 feet high.

Basketball Hoop Installation: Services

We assemble inground and portable basketball hoops.

​

​

​

WHAT TO EXPECT DURING THE INSTALLATION PROCESS?
The in-ground basketball installation is a 2-phase process.
Phase 1:
All underground wires must be identified before the labor can begin. OCY will contact 811 for you at no additional cost. Once 811 deems it safe to dig in the general hoop area, the task can start. On the first site visit, we will discuss the best placement for your hoop based on your specific basketball system. On the same day, the excavation will be completed. And rebar and anchor system will be embedded before the concrete dries too much. This is the most critical part of the installation process to get right, as it's the foundation for everything to come later. The concrete then needs to dry for 3-4 days. Keep in mind weather will alter the installation date. After which I'll return for the 2nd visit to erect your system.
Phase 2:

Your basketball system will be assembled and leveled to precision. This part of the process should take about 1.5 to 2 hours.  As soon as the last bolt is tightened and everything is double checked for excellence, the fun can begin immediately. 

Basketball Hoop Installation: Text
Basketball Hoop Installation: Pro Gallery
bottom of page